New Original Phoenix Starter - Elr H5-Ies-PT-24DC/500AC-2-T - 2906059

Dimensions
Width    22.5 mm
Height    107.5 mm
Depth    114 mm
Ambient conditions
Ambient temperature (operation)    5 °C ... 70 °C (observe derating)
Ambient temperature (storage/transport)    -40 °C ... 80 °C
Maximum altitude    ≤ 2000 m
Degree of protection    IP20
Device supply
Rated control circuit supply voltage US    24 V DC
Control supply voltage range    19.2 V DC ... 30 V DC
Rated control supply current IS    40 mA
Type of protection    Surge protection
Reverse polarity protection
Input data
Input name    Control input right/left
Rated actuating voltage UC    24 V DC
Triggering voltage range    19.2 V DC ... 30 V DC
Rated actuating current IC    5 mA
Switching threshold    9.6 V ("0" signal)
19.2 V ("1" signal)
Switching level    < 5 V DC (For EMERGENCY STOP)
Typical turn-off time    < 30 ms
Type of protection    Reverse polarity protection
Output data load output
Output name    AC output
Rated operating voltage Ue    500 V AC
Operating voltage range    42 V AC ... 550 V AC
Rated operating current Ie    2.4 A (AC-51)
2.4 A (AC-53a)
Mains frequency    50/60 Hz
Load current range    180 mA ... 2.4 A (see to derating)
Trigger characteristic in acc. with IEC 60947-4-2    Class 10A
Cooling time    20 min.
Leakage current    0 mA
Type of protection    Surge protection
Output data reply output
Output name    Acknowledge output
Note    Confirmation: floating change-over contact, signal contact
Contact type    1 changeover contact
Switching capacity according to IEC 60947-5-1    3 A (230 V, AC15)
2 A (24 V, DC13)
General
Motor starter type    Reversing starter
Switching frequency    ≤ 2 Hz (Load-dependent)
Mounting position    vertical (horizontal DIN rail, motor output below)
Mounting type    DIN rail mounting
Assembly instructions    alignable, for spacing see derating
Operating mode    100% operating factor
Maximum power dissipation    3.3 W
Minimum power dissipation    1.1 W
Operating voltage display    Green LED
Status display    Yellow LED
Indication    Red LED
Connection data
Connection name    Control circuits
Connection method    Push-in connection
Stripping length    10 mm
Conductor cross section solid    0.2 mm² ... 2.5 mm²
Conductor cross section flexible    0.2 mm² ... 2.5 mm²
Conductor cross section AWG    24 ... 14
Connection data 2
Connection name    Load circuit
Connection method    Push-in connection
Stripping length    10 mm
Conductor cross section solid    0.2 mm² ... 2.5 mm²
Conductor cross section flexible    0.2 mm² ... 2.5 mm²
Conductor cross section AWG    24 ... 14
Insulation characteristics
Rated insulation voltage    500 V
Rated surge voltage    6 kV
Overvoltage category    III
Degree of pollution    2
Designation    Insulation characteristics between the control input and control supply voltage, and auxiliary circuit to the main circuit
Insulation    Safe isolation (IEC 60947-1/EN 50178) at operating voltage ≤ 300 V AC
Basic isolation (IEC 60947-1) at operating voltage 300 ... 500 V AC
Safe isolation (EN 50178) at operating voltage 300 ... 500 V AC
Designation    Isolation characteristics between the control input and control supply voltage to auxiliary circuit
Insulation    Safe isolation (IEC 60947-1) in the auxiliary circuit ≤ 300 V AC
Safe isolation (EN 50178) in the auxiliary circuit ≤ 300 V AC
Standards and Regulations
Designation    Standards/regulations
Standards/regulations    IEC 60947-1
EN 60947-4-2
IEC 61508
ISO 13849
Conformance/approvals
Designation    ATEX
Identification     II (2) G [Ex e] [Ex d] [Ex px]
II (2) D [Ex t] [Ex p]
Certificate    PTB 07 ATEX 3145
Designation    UL approval
Certificate    NLDX.E228652
Designation    Safety Integrity Level (SIL, IEC 61508)
Identification    ≤ 3
Additional text    Safe shutdown
Designation    Safety Integrity Level (SIL, IEC 61508)
Identification    2
Additional text    Motor protection
Designation    Performance Level (ISO 13849)
Identification    ≤ e
Additional text    Safe shutdown
Designation    Category (ISO 13849)
Identification    ≤ 3
Additional text    Safe shutdown
UL data
SCCR    100 kA (500 V AC (fuse: 30 A class CC/30 A class J (high fault)))
5 kA (500 V AC (fuse: 20 A RK5 (standard fault)))
FLA    2.4 A (500 V AC)
Group installation    20 A (class RK5, SCCR 5kA, #24 - 14 AWG max. solid and stranded)
30 A (class CC or J, SCCR 100kA, #24 - 14 AWG max, solid and stranded)
Category code    NLDX / NRNT
Environmental Product Compliance
REACh SVHC    Lead 7439-92-1
China RoHS    Environmentally Friendly Use Period = 50 years
For details about hazardous substances go to tab "Downloads", Category "Manufacturer's declaration"